Free Garrett Wade Catalog Sign In  |  Wish List
Cart0 items $0.00
100% Secure Shopping Cart

High Pressure Glue Injector

Repairs furniture without disassembly
4.5  ( 9 Customer Reviews )
Stock Number Item Description Availability Price Order Qty
08S01.01 High Pressure Glue Injector
In Stock $28.75  
08S01.02 Optional 1/16 In. Tip
In Stock $8.95  
08S01.03 Replacement 1/32 In. Tip
In Stock $8.95  
  Email to a Friend    Add to Wish List

This terrific tool excels at repairing furniture joints, veneers and laminates, stair rails—even musical instruments. Simply drill a tiny 1/32" hole (1/16" for higher volume dispensing), press the solid brass 1/32" tip against the drilled hole, and squeeze. Maintains up to 600 psi of pressure for fast glue dispensing. This excellent tool belongs in every woodworking shop and job-site toolbox. Use only with yellow or white water-based PVA glues. Wash out and re-use. USA.

Customers Ratings and Reviews
Free September 2015 Catalog Request
Overall Rating :4.5 
Write an online review and share your thoughts with other customers

4  - 
Great Device
Reviewed By:   (Chatham, New Jersey) 
This is just what I needed to repair some chairs. The device creates plenty of pressure for injection and the tip fits a small hole for the job perfectly. The tool cleans up easily for storage. It is well built and I expect to use it a long time.

3  - 
Update Review
Reviewed By:   (Santa Maria, CA) 
Well despite the problem I had with this product resulting in my poor review, I certainly can't complain about GW's customer service. Totally unexpected and unsolicited, they sent a replacement for my injector. The new one seems better in that the plunger is much easier to insert into the barrel. Maybe the gasket on the first one was over-sized - I'm not sure since I deep-sixed it out of frustration. I've yet to try the new injector on a project but expect it will work much better. At least I hope it does :-)). Anyway, I’ll continue to order from GW due to their focus on customer satisfaction. Thanks GW.

2  - 
Works Good - If You Can Get the Plunger In
Reviewed By:   (Santa Maria, CA) 
Once the glue and plunger are in this product works fine. But getting the plunger into the reservoir is a joke! The first couple of times I was able to press like !!@# on the plunger and get the rubber oring to go into the housing. But for a critical glue job, I needed to add glue to the reservoir and just couldn't get the dang plunger in. I started working it back and forth trying to get one side in and ended up busting off the tip of the plunger making the whole $29.95 plus an extra tip a worthless piece of junk fit only for the trash can on my shop floor. Note that each time I filled it I used mineral oil on the oring to ease the process but this didn't seem to help much. I realize now I should of chamfered the injector barrel a bit to help ease the plunger oring in but that's 20/20 hindsight. Seems it should of been made that way to begin with.

Response By: Garrett Wade Tech Department
Thank you for your review on the High Pressure Glue Injector. We are sorry to hear that you experienced trouble with it.  We are sending you out a replacement, free of charge. We hope that it will fare better the second time around.  Again, we apologize for the inconvenience.

4  - 
Satisfied Customer
Reviewed By:   (Constantia, W.Cape, South Africa) 
My recent purchase was for a replacement glue injector which I had bought a few years ago and which I inadvertently knocked off the workbench. It landed on the nozzle and the male threaded end of the plastic tube broke off. Of course, the accident was due to my carelessness, but accidents do happen in workshops, and this accident revealed a possible shortcoming in the design which might be modified. Otherwise, I think the injector is a brilliant idea and I have used it with satisfaction. I must add that I made my first purchase from Garrett Wade in your New York store in 1996 and from time to time I have purchases online. The service I have received from GW has always been of the highest order and the tools of excellent quality, hence the Satisfied Customer.

5  - 
Must Have
Reviewed By:   (Jenkintown, PA) 
A must have for the shop. The addition of a cap for the nozzle would be a helpful improvement to prevent leaking and drying of glue in between applications. Otherwise use a small container of water to set the applicator in during assembly. After cleaning, apply a thin layer of mineral oil on the plunger's rubber O-ring to keep it guiding smoothly through the glue chamber.

Show More Reviews...

100% Guarantee   -   About Us   -   Contact Us   -   Customer Service   -   Email Signup   -   Free Catalog   -   Privacy   -   Return Policy   -   Shipping   -   Site Map   -   Tell a Friend
Garrett Wade Tool Company For Help Call 24/7 - 800-221-2942
5389 E. Provident Drive, Cincinnati OH 45246
©2015 Garrett Wade
SecurityMetrics Certified