Hot Stuff Quick Drying Glue

There is no shortage of cyanoacrylate (“instant”) glues available. But the real secret to successful use of these terrific Hot Stuff glues is enough variety in their formulation to be effective on a range of materials (wood, glass, metals, rubber, leather, most plastics etc) and (most importantly) on a variety of “joints” (tight, slightly sloppy, really sloppy etc). The Hot Stuff range is the best we have seen, but is not well distributed through local stores, so we have resolved to make it available. Pass up the offerings on those racks. This stuff is much better.

Original Hot Stuff is thin and is best used for cracks and where the joining surfaces mate well. Super-T has been thickened to add gap filling capacity. Special-T has been further formulated for ultra-gap filling properties. Original Hot Stuff sets in a few seconds and the others, as expected, somewhat slower (10 to 40 seconds). Accelerator is a mist spray that speeds up curing of all three. (Be judicious, as it really accelerates the setting of all 3 Glues.) The Solvent is very useful in separating surfaces that have been accidentally joined and in getting residual dried Hot Stuff off your fingers, to which a bit always seems to eventually migrate.

Hot Stuff is very good stuff. We heartily recommend it. The Starter Set (all three Glues + Accelerator + Solvent) will give you all you initially need. Follow all written use tips for best results.