Lumber Storage System - Reviews, Consumer Ratings & Comparisons
Write an online review and share your thoughts with other customers
Sort Reviews :
Newest |
Oldest |
Highest Rating |
Lowest Rating
:: Viewing page 1 of 1
|
- Tuesday, September 15, 2009 |
| Super Heavy Duty Hangers |
| Reviewed By: |
MRG (Vestavia Hills, Alabama) |
| First off, these brackets are designed for use in prefab manholes to attach multiple runs of communications cable, piping, etc. I know, I installed plenty of it. GW's reply on how to install is right on target. You will never be able to overload these brackets if attached to wood as the wood will fail first.Use a lag screw that is at least 5/16x2" long along with fender washers that are at least 1 1/2" in diameter. If you can use nuts and bolts, do so and use graded fasteners to match the strength of the brackets Whatever you attach these brackets to has to be STRONG. No Sheetrock and anchors. They are heavy industrial parts and you will need to use a 3/4" solid wood shelf if spanning more than 16" or you will most likely have sag issues. They are really not designed to install into a wood 2x4, but if you trust your wall, these brackets can be used with great success. |
:: Viewing page 1 of 1
|
©2012 Garrett Wade