Portable Drill Guide Jig - Reviews, Consumer Ratings & Comparisons
Write an online review and share your thoughts with other customers
Sort Reviews :
Newest |
Oldest |
Highest Rating |
Lowest Rating
:: Viewing page 1 of 1
|
- Friday, January 07, 2011 |
| Quality Tool |
| Reviewed By: |
Mark Lang (Bethlehem, PA) |
| I ordered this portable drill guide jig because I need to occasionally drill holes on an existing device of some kind or in a situation where a drill press is not practical. I was pleased to see that the guide is pretty well made. The chuck slides easily along the guide rods so it does not interfere with the drilling operation, and the angle is relatively easy to adjust. One must set the angle by eyeballing lines on the rotating mechanism at the base of each guide rod. While this is not as precise as a drill press, in practice it seems to work pretty effectively. All in all, this is one of the best drill guides I have seen. |
|
- Wednesday, December 29, 2010 |
| Drill jig used ASAP |
| Reviewed By: |
Alan Wright (Marquez, TX) |
| I was building a gun rack w/ dowel gun support rods inserted in the back frame of the rack so I needed the jig right away. Drilled the angled holes with the jig clamped to the work piece. Holes all lined up well and drill stop kept the drill from punching thru the back. The jig worked well for my app, there's a little play in the slider rods side to side but I over came that by holding steady toward one side. Good material and nicely built for the home craftsman. Alan |
|
- Sunday, April 18, 2010 |
| handy |
| Reviewed By: |
Andrew (Blacksburg, VA) |
| versatile and accurate |
:: Viewing page 1 of 1
|
©2012 Garrett Wade