Set of 4 Japanese Saws

Japanese saws cut quickly and smoothly, and are a joy to use. Because they cut on the pull (not the push) stroke, the blade is in tension during use, so it can be thinner with a much finer kerf. Bowing is eliminated, and set can be minimized. Great control over the cut is the result. We recommend the following four as an excellent cross-section.

These saws are all made to our specifications. We offer them here specially as a set at a savings.

The Replaceable Blade Ryoba in a 9-1/2" blade length. One side of the blade is filed with fine teeth for cutting across the grain. The other is coarser for ripping along the grain.
The Flush Cutting Saw (blade 6" long, 24 tpi) will cut off flush pegs, through-tenons, and other exposed waste parts of joints absolutely flush. An extremely flexible blade with no set, it will not mark the adjacent surface.
The Japanese Detail Trim Saw has a fine toothed very narrow blade and a walnut handle. Tool length is 9". The 18 tpi blade is 4-1/4" long and 5/16" wide.
The Special Japanese Dovetail Dozuki excels as a stiff backed joint cutting saw. The blade is 7" long with 25 tpi. Maximum depth of cut is 1-3/4".

The saws in this set are listed here individually, including their replacement blades.