Free Garrett Wade Catalog Sign In  |  Wish List
Cart0 items $0.00
100% Secure Shopping Cart

4-Way Corner & Frame Clamp

Speed nut design for fast set up
4.5  ( 6 Customer Reviews )
Today's Price:$28.95
Stock Number Item Description Availability Price Order Qty
91G01.04 Frame Clamp
Backordered
Expected by 12/2/2014
$28.95  
  Email to a Friend    Add to Wish List

A remarkably simple and effective clamping system. Long (24") threaded rods screw into four corner blocks; the whole assembly is quickly closed up to the frame by sliding the speed nuts along the rods. A quick locking twist applies final pressure. Each corner is relieved with an inside channel to ensure that the mitre fits snugly. Made in Taiwan.

Set includes 8 individual 24" rods, 4 extension nuts, 4 tightening nuts, and 4 corners.

Click here to Download a PDF* formatted informational / instructional sheet.

(*Note: Requires Adobe Acrobat Reader)



Customers Ratings and Reviews
Free November 2014 Catalog Request
Overall Rating :4.5 
Write an online review and share your thoughts with other customers


5  - 
Excellent Product
Reviewed By:   (Austin, TX) 
This is the best inexpensive tool for making frames that I've used. The unique brass nuts make tightening the frame very easy. I used it to make a small drawer and it came out perfectly square. When you assemble the device, which is easy, note the instructions about the tightening nuts. They don't seem as if they'd work, but they do. When you release the device, the screws will slide off the metal shafts (part of the design) so I just used some blue tape to keep them on. That way they won't get lost.

5  - 
Why This Purchase.
Reviewed By:   (Kansas City, Missouri) 
I purchased the "4-Way Corner & Frame Clamp" because my "Self-Squaring Frame Clamp" didn't work on a past project where there was no hole in the center for the bolt section to fit. I have no current project for it but did make a case for it to keep all the parts together until I need it.

5  - 
Clamptastic!
Reviewed By:   (Watervliet, New York) 
Although backordered when I put my order in, I had an opportunity to use a set of these clamps in a box making class. They are very easy to use and make aligning the mitres a breeze. I have all the parts cut for more boxes when mine arrive. Thank you.

4  - 
Framer
Reviewed By:   (Whitney, Texas) 
Have not actually used it yet but put it together and it is going to work real well. A little awkward but going to make making frames an easier chore.

1  - 
A Terrible Product
Reviewed By:   (Colbert, WA) 
After the female threads were cut in the knurled brass nuts, the hole was enlarged and drilled at an angle to allow the nuts to quickly slide along the all-thread rods before reaching the corners. This leaves precious few partial female threads. Then, when the nuts square-up with the corners, the partial female threads are supposed to engage the male threads sufficiently to allow for tightening. Perhaps this was a good idea, but it was poorly executed on the product I received. As soon as I started to tighten the nuts, they disengaged -- failed. I am very surprised to see this poor product come from Garrett Wade. I returned mine promptly.


Show More Reviews...
 

return policy   |   shipping   |   email signup   |   about us   |   guarantee   |   contact us   |   customer service   |   free catalog   |   privacy   |   site map   |   tell a friend   |   Mobile View
SecurityMetrics Certified
ABOUT SSL CERTIFICATES
Garrett Wade Tool Company ©2014 Garrett Wade
5389 E. Provident Drive, Cincinnati OH 45246
Need Help? Call us 24/7 at 1-800-221-2942
Garrett Wade is an Upfront Merchant on TheFind. Click for info.